vurshoppe.blogg.se - Diptrace to eagle

In the resulting dialog, select the correct files for the Bottom (if you’re milling a double-sided board should end in.

If you followed the instructions above, this file will end in the.

Open the Gerber file containing the Top layer.

Navigate to the directory that contains your Gerber files.

In the software, click the Open Files button.

Save the file into the same folder as the Gerber files.

Click the Auto button to assign tools numbers to the hole sizes.

In the PCB Layout Editor, click File > Export > N/C Drill.

For example, for a 1/32" (0.031") tool, make a row of 0.033" holes, with centers spaced 0.016" apart. If you need a slot, make a row of overlapping holes that are a few thousandths of an inch larger than the tool and overlap by about half their diameter.

First make sure you’re not using slotted or oval holes, as the software doesn’t support the G85 command that's used to make them.

Click Export All, select a folder, then click Save until all files are saved.

In the Units section, select Metric (see screenshot).This will result in Gerbers that follow the software's standard filename conventions. In the Gerber Files window that appears, configure the default filenames and export options as shown in the following image.In the PCB Layout Editor, click File > Export > Gerber.How do I get my board design from DipTrace into the Bantam Tools Milling Machine Software?

You can also find DipTrace’s tutorials on the site. Where can I find documentation about DipTrace? What is DipTrace?ĭipTrace is a commercial program for designing circuit boards. For DipTrace users who want to mill their circuit board designs on your Bantam Tools Milling Machine, here are instructions to generate Gerber files that can be imported the to Bantam Tools Milling Machine Software.